INDICATOR MODEL

Technical Specifications

Input Voltage : 240 VAC/50 HZ/1 Ph.
Relay : 30 A at 240 VAC
Operating Voltage : 170 - 260 V / 1 Phase

Ambient Temperature : 0 -45℃entigrade
Calibration Accuracy : +/-2.5%
Dimensions : 130x170x68 mm
Display : LED

Our Indicator model provides all the features provided by our Economy model with water level indicators to help customers manage water better. This model provides 4 overhead tank level indications ( >25%, >50%, >75%, 100%) and 3 sump level indications (20%, 40% and 100 %). It also has the exact water flowing indication from sump to overhead tank.

Functions:

1) Swtiches on the motor when the water level in the over head tank reaches minimum level.
2) Swtiches off the motor when the water level in the over head tank reaches maximum level.
3) Functions 1-2 are co-ordinated with the levels of water in the sump, ie. the motor is not started when the water level in the sump as at minimum, it is started as the water level approaches maximum in the sump.
4) In case of a dry run, it switches Off the motor within the programmed time delay and gives an Alarm.

Indications:

1) Four overhead tank level indications ( >25%, >50%, >75%, 100%)
2) Three sump level indications (20%, 40% and 100 %).
3) Exact water flowing indication from sump to overhead tank.

Additional:

1) Model is equipped with High and Low Voltage Cuto-ff with indication.
2) Manual and Auto mode of operation Switch is provided.

Suitability:

1) This model is well suited for all domestic applications in the Sump-Overhead tank modes where the water supply is lesser and/or the users are more.
2) Can also be used for Borewell/Openwell-Overhead tank modes of operation.
3) Can be used for rainwater pumping operations.

Available Only for single phase Sump up-to 1.5 hp

In case you experience confusion or need advice please Click Here to contact us without any obligation.
Our experts will be glad to assist you.